Rinnai

Compact 2 Traditional Matt Black Steel

$2,168.00
In stock :
In Stock
Product Code: RIBF2L
Frame :
Burn Media :
Gas :

If you want plenty of heating but only have a small space to fit a gas fire, the Compact 2 is the fire for you.

 

The Rinnai Compact 2 has been deliberately designed to get into those tighter spaces, whether it's an existing masonry chimney or a smaller living room. It's easy to retrofit and it looks terrific.

Key benefits and features:

  • Frame options: Range of frames to update any living space
  • Small and safe: Overheat switch and flame-failure detectors are part of the safety specifications
  • 2-speed convection fan: Quickly and effectively disperses the heat
  • Easy installation: Shallow firebox will fit most existing fireplaces
  • Manual controls: Operation is easy push button controls
Fan           Electronic ignition                  Manual Control
Fan          Electronic ignition      Manual Control
 

Suitable for
Domestic heating appliance suitable for living rooms and open plan areas. Heating area 50-77 m² (depending on where you live in NZ).

Please bear in mind that the Compact 2 has a robust fan which is audible, especially in smaller rooms. If the operating noise of the gas fireplace plays a significant factor in your purchase decision we always recommend viewing a working model. To see who has a working display in your area, select the ‘Features’ tab and click on the ‘See it in action’ link in the top left of your screen.

Gas type
Available for Natural Gas or LPG. Specify gas type at time of purchase.

General clearances around the Compact 2
The appliance must not be installed where curtains or other combustible materials (coffee tables, couches etc.) could come into contact with the fire. In some cases curtains may need restraining. The 1000 mm clearance above is the clearance to the ceiling. The 300 mm side clearance includes side walls.

Diagram showing minimum clearances around the fire while it is in operation

 

Input

9-25 MJ/h

Output

1.6-5 kW*

Efficiency

73%

Energy Star Rating

2.8

 

Burners Ember bed and flame burner
Combustion system Naturally aspirated multi port burner
Data plate Inside the appliance on the front right hand side panel
Fan Convection fan tangential 2-speed
Flue - masonry Rinnai strongly recommends the use of a Rinnai flexiliner flue system. Failure to meet this criteria may result in an unsafe situation. Installation without a flexiliner flue is permissible as long as the chimney is checked for soundness and ability to achieve a good draw. If in doubt install a Rinnai flexiliner flue system.

Rear discharge spigot 43 x 245 mm.
Flue - decorative chimney (installations into a combustible opening)

Natural draft double skin flue. Termination—an approved 100 mm cowl must be fitted to all installations.

For new fireplace installations (installations into a combustible opening) a Rinnai zero clearance box and flue kit is a mandatory requirement to meet warranty conditions.

Flue dimensions; outer 150 mm, inner 100 mm.
 

Gas connection ½ " BSPF male flare
Gas control Push button combination control valve
Ignition Continuous spark electronic ignition
Noise level 49 dB(A)
Operation Push button to light to pilot and burners (low, medium, and high)
Power consumption High 20 W, standby 0 W. The electrical connection can exit the appliance from the lower left or right hand side, or from the rear of the heater.
Safety devices Flame failure thermocouple, overheat switch, fan delay, and power failure protection.
Weight 39 kg
Market release May 2012
ES: Supplier Declaration of Compliance Declaration Number:1489820136
   
* Please note kW output will vary according to geographical location in NZ

Shipping cost

New Zealand

For all other orders, shipping rates are given on purchase.

  • Delivered using Appliance Star Delivery Service and/or reputable New Zealand Logistics Companies.
  • A track and trace can be provided.
  • Signatures are required on these parcels.
  • In the event that your parcel does not arrive with 15 working days of placing the order, please notify us.

Order Processing Time

  • Orders are processed within 3 to 5 working days of receipt (processing time does not include weekend and public holidays).
  • Orders placed on Saturday and Sunday will be processed on the following Monday.
  • Orders are processed and shipped on business days only (Monday through Friday, excluding holidays).
  • You should contact us immediately for any urgent items on your order.

Shipment Lead Time

  • Shipping time depends upon location and customs.
  • New Zealand Delivery can take 1 to 4 business days plus our processing time as mentioned above.

 

Track and Trace

New Zealand

Yes. Track and trace is available for domestic parcels. If you would like to receive your tracking number, please contact us or simply write your request during check out.